热管技术在化工领域的应用

热管是一种通过工作介质反复相变来进行传热的高效换热元件，在各种工业领域广泛应用。通过对中外文献的分类整理，简单地阐述了热管的发展历史、工作原理以及主要优点，并主要介绍了热管技术在化工领域几个方面的应用。在此基础上探讨了热管技术最新的发展方向，认为高温热管和微型热管技术发展最快，数值模拟技术将在热管研究中发挥重要作用。     

Forging penetration efficiency of steel H13 stepped shaft radial forging with GFM forging machine

The numerical thermal mechanical simulation of radial forging process of steel H13 stepped shaft with GFM (Gesellschaft fur Fertigungstechnik und Maschinenbau) forging machine was carried out by three-dimensional finite element code DEFORM 3D. According to the effective plastic strain, the mean stress and the mean plastic strain distribution of the radial forging, the forging penetration efficiency (FPE) was studied throughout each operation. The results show that the effective plastic strain in the center of the forging is always greater than zero for the desirable larger axial drawing velocity. The mean stress in the center of the workpiece is proposed to describe hydrostatic pressure in this paper. There is compressive strain layer beneath the surface of the workpiece to be found, while there is tensile strain core in the center of the workpiece. These results could be a valuable reference for designing the similar forging operations.     

基于居民出行特征的城市近郊组团交通发展对策

本文通过对广州市近郊区（环城高速以外地区）十个大型居住区居民出行调查数据分析,从交通出行目的、出行强度、时间特征、空间特征及方式构成等方面总结居民出行的规律、变化特征及其原因,并与广州市2005年居民出行资料进行对比分析,提出城市近郊组团的交通发展对策,为广州中心城区未来人口疏解、近郊组团规划建设提供参考.     

放射式轨道路网的系统出行成本研究

探讨放射式轨道路网下的系统出行成本，能够为评价轨道交通服务水平、确定合理的线路数量和运营参数提供理论支持。基于研究区域人口密度服从Clark 分布，建立了系统出行成本模型。模型将乘客在步行时间、车站等待时间和车上等待时间换算为费用作为系统出行成本的一部分，结合运营商的运营和维护成本得到系统人均出行总成本。以成都市为例，通过模型分析确定最优发车频率为13 veh/h、轨道线路数为5条，较符合实际情况，验证了模型的有效性。     

Research on Energy Efficiency Design Index for Sea-going LNG Carriers

This paper describes the characteristics of liquefied natural gas （LNG） carriers briefly. The LNG carrier includes power plant selection, vapor treatment, liquid cargo tank type, etc. Two parameters fuel substitution rate and recovery of boil of gas （BOG） volume to energy efficiency design index （EEDI） formula are added, and EEDI formula of LNG carriers is established based on ship EEDI formula. Then, based on steam turbine propulsion device of LNG carriers, mathematical models of LNG carriers＇ reference line value are established in this paper. By verification, the EEDI formula of LNG carriers described in this paper can provide a reference for LNG carrier EEDI calculation and green shipbuilding.     

Vehicle type choice under the influence of a tax reform and rising fuel prices

Differentiated vehicle taxes are considered by many a useful tool for promoting environmentally friendly vehicles. Various structures have been implemented in several countries, e.g. Ireland, France, The Czech Republic, and Denmark. In many countries the tax reforms have been followed by a steep change in new vehicle purchases toward more diesel vehicles and more fuel-efficient vehicles. The paper analyses to what extent a vehicle tax reform similar to the Danish 2007 reform may explain changes in purchasing behaviour. The paper investigates the effects of a tax reform, fuel price changes, and technological development on vehicle type choice using a mixed logit model. The model allows a simulation of the effect of car price changes that resemble those induced by the tax reform. This effect is compared to the effects of fuel price changes and technology improvements. The simulations show that the effect of the tax reform on fuel efficiency is similar to the effect of rising fuel prices while the effect of technological development is much larger. The conclusion is that while the tax reform appeared in the same year as a large increase in fuel efficiency, it seems likely that it only explains a small part of the shift in fuel efficiency that occurred and that the main driver was the technological development.     

Energy efficiency and time charter rates: Energy efficiency savings recovered by ship owners in the Panamax market

This paper presents the first analysis on how financial savings arising from energy efficient ships are allocated between owners and those hiring the ships. This as an important undertaking as allocation of financial savings is expected to have an impact on the incentives faced by ship owners to invest in more energy efficient vessels. We focus on the dry bulk Panamax segment as it contributes to around 50 Mt (5%) of total CO₂ emissions from shipping in 2007 and therefore its importance in terms of environmental impact should not be neglected. The time charter market represents a classical example of the principal–agent problem similar to the tenant–landlord problem in the buildings sector. We discovered that on average only 40% of the financial savings delivered by energy efficiency accrue to ship owner for the period 2008–2012. The finding that only part of the savings are recouped by shipowners affecting their incentives towards energy efficiency could consequently have implications on the type of emission reduction policies opted at both, global and regional levels.     

An advanced traveler general information system for Fresno,California

This study estimates the effects of an advanced traveler general information system (ATGIS), which includes fuel consumption and health-related emissions cost information on transportation network users’ travel choice behavior for recurrent congestion conditions. The effects are estimated using four different formulations based on four different behavioral assumptions. Incorporating stochastic features in link cost estimation rather than in route choice, we provide a novel modeling approach that enables us to use transportation planning models of major metropolitan areas without a need for major computationally-expensive changes in the existing models. We examined the effects of an ATGIS on the Fresno, CA, road network and found several interesting results. First, the ATGIS impact is closely related to pre-system (prior to the implementation of an ATGIS) perceived fuel and emissions costs. Total travel time in the city can be reduced by 17% (no pre-system perceived costs) to 1% (accurate pre-system perceived costs), and even increased by 1% (higher-than-actual pre-system perceived costs). Second, the addition of emissions costs, although negligible relative to fuel and time costs, can effectively reduce total system-wide travel time by up to 1% and fuel consumption by up to 0.6% during peak hours. Third, the ATGIS can reduce annual social costs by as much as $1053 million (high gas price, no pre-system perception) to $48 million (medium gas price, accurate pre-system perception), which are comparable to social cost savings by a congestion pricing (CP) scheme in the study area.     

Charging infrastructure planning for promoting battery electric vehicles: An activity-based approach using multiday travel data

This paper studies electric vehicle charger location problems and analyzes the impact of public charging infrastructure deployment on increasing electric miles traveled, thus promoting battery electric vehicle (BEV) market penetration. An activity-based assessment method is proposed to evaluate BEV feasibility for the heterogeneous traveling population in the real world driving context. Genetic algorithm is applied to find (sub)optimal locations for siting public charging stations. A case study using the GPS-based travel survey data collected in the greater Seattle metropolitan area shows that electric miles and trips could be significantly increased by installing public chargers at popular destinations, with a reasonable infrastructure investment.     

Methodologies to monetize the variations in load factor and GHG emissions per passenger-mile of airlines

Global GHG emissions from air travel are currently at 3% and it could increase to 15% of the total GHG emissions by 2050. To curb the growth of GHG emissions from air travel, the U.S. Federal Aviation Administration (FAA) has created a policy to achieve carbon neutral growth by 2020 relative to the 2005 baseline. If the airline industry is to both grow and meet the objectives set by this policy, new and innovative aircraft designs, operational efficiencies, and widespread use of alternate fuels are required. To accomplish this would require large research and development investment. The federal government and state governments have passed legislations that provide tax breaks and other incentives to encourage investments in new technologies. One such tax policies is cap and trade system. This had partial success in reducing GHG emissions in certain industries but was not successful in the airline industry. This paper presents alternate methods to raise capital to invest in GHG emissions reduction projects in the airline sector. The four methodologies presented here monetizes the GHG emissions resulting from differences in load factor (ratio of number of passengers to number of seats) and GHG emissions per passenger-mile among different airlines, among different flight sectors, etc. to raise the capital. Based on 2012 air travel data, these methodologies could raise more than $300 million dollars annually to invest in GHG emissions reduction projects.